MUSTA 3.0 TV SWING ARM OPERATION
During transport and when the vehicle is not in use, the TV is stowed away and locked in place with a support strap and wedge. When setting up the screen for outdoor use, please follow the following steps, noting that this is an advised two person operation. Additionally please ensure weather conditions, primarily rain and winds are considered in the deployment.
One operator should remove the support strap and release all three locking pins so the swing arm can move freely.
Another Operator at the other side of the screen should gently lift the screen over the wedge to allow the TV to swing-out.
Together using the two grip handles, carefully manoeuvre the screen toward the front Cab and out the Side door making sure to avoid all pinch points and potential impacts with the kitchenette, bench and Cabin walls.
Once the screen is outside the showroom, return the three locking pins into their locked position creating 2 right angles with the frame, along with the final pin behind the TV.
Finally, secure the TV to the vehicle door, using the strap and suction cup as shown.
FOR FURTHER INFORMATION PLEASE WATCH THE SECTION 3 MUSTA TRAINING VIDEO BELOW.
TV OPERATION INSTRUCTIONS FOUND AT 5mins 18secs